Adding a sump pump can prevent flooding during heavy rainstorms and help keep your home from suffering from long-term water damage. It also improves the indoor air quality in your basement.
Start by finding a place in your basement that’s big enough for the basin and close to a GFCI outlet. If the floor is concrete, you’ll need a jackhammer to dig the hole.
Whether your property is prone to flooding or just suffers from basement moisture issues, installing a sump pump can save you money in the long run. A professional plumber can recommend the right pump for your home and install it.
A sump pump can be installed in a pit or basin that is dug into the ground or cut through the floor of your basement. The cost of installing the pump varies depending on the size, type, and location of the basin. Digging through basement floors costs more than drilling through a crawl space or outdoor area.
Other factors that increase sump pump installation costs include the power of the pump, a backup battery, and a specified switch type. It is best to hire a professional for installing a sump pump in your basement, especially if it requires digging through concrete. This will ensure that the pump is hooked up correctly and can protect your home from damage.
Investing in a sump pump helps to reduce the damage caused by water and moisture entering your home. It also keeps mold and mildew from growing, which can cause health issues. In addition, a sump pump can save valuable art, furniture and other items from the effects of water and moisture.
To install a sump pump, first locate where the bulk of the water is gathering and dig a pit in the floor. Use a demolition hammer to break into the floor and expose the water.
Next, cut a hole in the floor to fit the basin into and backfill around the edges with excavated soil. Add a bed of rock in the bottom of the pit to prevent silt and rocks from clogging the sump pump.
Place the basin in the hole and pour a bed of rock beneath it to raise the bottom of the basin up flush with the concrete floor. Finish plumbing the discharge piping with a threaded Jackel 1-1/2″ check valve. If using a battery backup, install the included float switch.
Installation Sump Pump Installation
You should have an experienced plumber install your sump pump. They will help you select the right size of pump and the correct location, and hook it up to an appropriate power supply so that it can effectively drain water away from your home. They can also assist you with installing a battery-powered backup system, which reduces the risk of flooding and ensures your home is protected even when the power goes out during a storm.
Before you begin, read the owner’s manual for your pump and familiarize yourself with all of the parts. Make sure that you choose a location that is near a Ground Fault Circuit Interrupter (GFCI) outlet, which will prevent electricity from flowing back through the piping and causing an electrical fire.
Start by digging a hole 6’’ deeper and 10’’ wider than the basin. Add gravel to the bottom of the pit and set the pump on top of it. Next, install a check valve on the pump’s outlet to prevent water from draining back into the pit once the float stops rising.
Before attempting any home sump pump installation, it’s important to review the user manual and familiarize yourself with all the different parts. This will help you understand how the unit works and what it does best. Also, it’s a good idea to consider getting a backup sump pump that doesn’t require electricity and can be used in the event of a power outage.
It’s also a good idea to check the sump pit on a regular basis. Start by pouring a few buckets of water into the pit and watching for how long it takes to empty. If you see that it’s taking longer than it should, this could indicate a problem with the float switch or a blockage in the drainage pipes. You should also make sure the discharge line is pointing away from your house and that it’s unobstructed. If you notice any unusual noises coming from the pump, contact a professional for assistance.